Mayar da L/min zuwa m³/h lita a minti ↔ mita kubik a awa Kyauta A kan layi Amintacce
Ku rubuta ƙima a lita a minti ku karanta ta a mita kubik a awa nan take. Ma'aunin daidai ne bisa ayyanawa, lissafin yana faruwa a cikin burauzarku, kuma ba a aika komai ko'ina ba.
Ba a ɗora komai ba
Mayar daga lita a minti
Ƙimomin da aka fi amfani da su — Mayar da L/min zuwa m³/h (lita a minti ↔ mita kubik a awa)
| L/min | m³/h |
|---|---|
| 1 | 0.06 |
| 2 | 0.12 |
| 3 | 0.18 |
| 5 | 0.3 |
| 10 | 0.6 |
| 20 | 1.2 |
| 50 | 3 |
| 100 | 6 |
Daga ina waɗannan ma'aunai suka fito
Gudun ruwa (flow rate) shi ma ba shi da ma'auni na kansa: girma ne da aka raba da lokaci, don haka kowace sana'a ta riƙe girman da take amfani da shi tuni ta haɗa shi da lokacin da ya dace da girman aikin. Lita a minti ɗaya ya fito daga famfo, famfunan ruwa da duk abin da mutum yake kallo yana cika; mita kubik a awa ɗaya daga hukumomin ruwa, iskar shiga ɗakuna (ventilation) da ban ruwa, inda minti ya yi gajarta da za a amfana da shi; galan na Amurka a minti ɗaya daga aikin famfo na Amurka, dokokin kashe gobara da famfunan rijiya. Lambobin sun bambanta sosai ga rafi ɗaya — lita ɗaya a minti ɗaya mita kubik 0.06 ne a awa ɗaya — shi ya sa famfo da aka ambata da ma'auni ɗaya da bututu da aka ƙididdige da wani ke zama tushen kurakurai masu tsada.
Inda kuke haɗuwa da su
Kan shawa yana fitar da kusan lita 9 a minti ɗaya, bututun lambu kusan ninki biyu na haka, kuma ana auna bolar gida da yawan lita a minti ɗaya da za ta iya ɗaga zafi da wani digiri da aka bayar. Mita kubik a awa ɗaya yana ƙayyade farashin ruwa, girman bututun iska da ƙarfin famfunan masana'antu. Galan a minti ɗaya yana bayyana a alamomin famfunan Amurka, tsarin yayyafa ruwa da ƙa'idojin famfunan kashe gobara.
Tambayoyin da mutane ke yi
Wane galan ne galan a minti ɗaya yake nufi a nan?
Galan na Amurka, lita 3.785411784. Galan na Imperial a minti ɗaya zai fi shi girma da kusan kashi ɗaya cikin biyar, don haka lambar Birtaniya da aka ambata a gpm aka karanta ta a matsayin ta Amurka tana ƙasa da ainihin gudun da kusan kashi ɗaya cikin shida. Takardun bayanai na famfo da na'urorin yayyafa ruwa da wuya su faɗi wanne suke nufi, don haka ku duba ƙasar da aka samar kafin ku amince da sauyi ta kowace hanya.
Gudun ruwa mafi girma iri ɗaya ne da matsin ruwa mafi girma?
A'a, kuma rikitar da su shi ne yadda ake lalata shawa. Matsin ruwa (pressure) shi ne turawa; gudu shi ne yawan abin da ke motsawa da gaske. Bututu siriri mai matsin ruwa mai yawa zai iya isar da ruwa kaɗan fiye da bututu mai faɗi mai ƙarancin matsi. Ana bayyana famfo da duka biyun tare — lanƙwasa da ke nuna gudun da suke samu a kowane matsi — domin babu ɗayan lambobin da yake da ma'ana sosai shi kaɗai.
Shin amsar daidai ce?
Inda aka ayyana ma'aunai biyun ta hanyar juna da cikakkun lambobi, i — shafin yana faɗin haka a saman lambar, kuma zagaye kawai shi ne yawan lambobin da ake nunawa. Inda rabon ba shi da lambar goma mai ƙarewa, shafin yana nuna muhimman lambobi goma sha biyu kuma yana cewa alaƙar kintace ce maimakon ya yi kamar ba haka ba ne.
Shin wani abu da na rubuta yana barin na'urata?
A'a. Ana yin lissafin a cikin burauzarku; ba a ɗora komai ba, kuma babu uwar garke da za a ɗora zuwa gare ta. Ku buɗe shafin sau ɗaya zai ci gaba da aiki ko da an kashe hanyar sadarwa.
Lita a minti zuwa mita cubic a awa: daga ƙaramar masana'antar gwaji zuwa cikakken tsarin aiki
Injiniyoyin sarrafa abu suna aiki a ma'auni biyu. Teburin dakin gwaji da ƙaramar masana'antar gwaji suna aiki a lita a minti, domin kwararar ruwan ƙanana ne kuma lambobin sun dace. Cikakkiyar masana'anta, famfunanta da mitocin kwararar ruwanta suna aiki a mita cubic a awa, domin kwararar ruwan manya ne. Mayar da ƙira daga ɗaya zuwa ɗayan yana nufin canza L/min zuwa m³/h akai-akai. Don canza L/min zuwa m³/h, ninka da 0.06: 10 L/min 0.6 m³/h ne, 100 L/min 6 m³/h ne kuma 1,000 L/min 60 m³/h ne. Na'urar lissafi ta sama tana ninkawa yayin da kake rubutu, kuma sassan da ke ƙasa suna nuna yadda lambobin ke aiki a tace ruwa, cire gishiri daga ruwa, da'irorin sanyaya da ƙayyade girman bututu.
Shafin yana ba da ƙa'idar tare da misalai masu aiki, taƙaitaccen bayani game da kowace raka'a, kwatance da kuma dogon jerin yanayin sarrafawa da kayayyakin more rayuwa, sannan kura-kuran da ake yawan yi. Lissafin yana gudana a cikin burauzarka kuma ba a aika komai da ka rubuta zuwa ko'ina. Ya kamata ƙwararren injiniya ya duba ƙayyade girman da ya shafi tsaro.
Yadda ake canza L/min zuwa m³/h: ninka da 0.06
Ƙa'idar
Mita cubic ɗaya lita 1,000 ne kuma awa ɗaya mintuna 60 ne, don haka kwararar lita ɗaya a minti lita 60 ce a awa, wato mita cubic 0.06 a awa. Don canza L/min zuwa m³/h, ninka L/min da 0.06: 25 L/min yana ba da 1.5 m³/h, 140 L/min yana ba da 8.4 m³/h kuma 700 L/min yana ba da 42 m³/h. Don komawa baya, ninka m³/h da 16.67.
Misalai masu aiki
Chiller na dakin gwaji da ke zagaya 15 L/min yana motsa 0.9 m³/h. Abincin reverse-osmosis na 50 L/min shi ne 3 m³/h. Famfon fitar da ruwa na 1,000 L/min shi ne 60 m³/h. Famfon auna sinadari na 5 mL/min shi ne 0.0003 m³/h kawai.
Dalilin da ya sa ma'aunin ya zama daidai
Ma'aunin 0.06 yana fitowa daga ma'anar lita, mita cubic da awa, don haka babu abin da aka zagaya a cikinsa. Kowace ƙasa mai amfani da metric tana amfani da lamba ɗaya, wanda ba za a iya faɗa game da galan ba.
Gwajin duba da sauri
Amsar a m³/h ta kai kusan kashi ɗaya cikin goma sha bakwai na lambar L/min. Idan lissafin “canza L/min zuwa m³/h” ya ba da lamba mafi girma fiye da wadda ka fara da ita, to ka ninka da 16.67 ne maimakon 0.06.
Lita a minti
Raka'ar ƙaramin ma'auni
Lita a minti raka'o'in aiki ne na dakunan gwaji, ƙananan masana'antu, famfunan gida da ƙananan mitocin kwarara. Lambobin ƙananan cikakkun lambobi ne, wanda ya dace da na'urori masu ma'auni na analog.
Inda yake bayyana
Dakunan gwaji, ƙananan masana'antun gwaji, ƙananan famfuna da na'urorin gida.
Mita cubic a awa
Raka'ar ma'aunin masana'anta
Mita cubic a awa raka'o'in aiki ne na famfuna, mitocin kwarara, tsarin tace ruwa da hanyoyin sadarwar kayayyakin more rayuwa. Lanƙwasar famfo, ƙimar mita da rahotannin ƙira na masana'antu suna amfani da su domin lambobin suna zama ƙanana a manyan kwararar ruwa.
Inda yake bayyana
Ƙasidun famfo, masana'antun ruwa da najasa, layukan sarrafawa da ayyukan gini.
L/min da m³/h
L/min ɗaya 0.06 m³/h ne, don haka lambar a m³/h ta fi ƙanƙanta kusan sau goma sha bakwai. 60 L/min 3.6 m³/h ne kuma 300 L/min 18 m³/h ne. Suna auna kwararar ruwa ɗaya; girman raka'a ne kaɗai ya bambanta.
Canjin daidai ne. Babban tarko shi ne gauraya lita a minti da lita a awa ko a daƙiƙa, waɗanda suka bambanta da ma'auni na 60.
Inda canjin yake bayyana
Faɗaɗa tsarin sarrafawa
Tacen gwaji da ke sarrafa 10 L/min, wato 0.6 m³/h, ana faɗaɗa shi da ma'auni na 100 don sarrafa 1,000 L/min, wato 60 m³/h. Faɗin tace na cikakken ma'auni yana girma da ma'auni ɗaya yayin da nauyin kowace mita murabba'i ya tsaya. Lissafin “canza L/min zuwa m³/h” shi ne layin farko a teburin faɗaɗawa.
Cire gishiri daga ruwa
Ƙaramar masana'antar reverse-osmosis da ke shan 50 L/min, wato 3 m³/h, da dawowa na kashi 75 cikin ɗari, tana yin 37.5 L/min na permeate, wato 2.25 m³/h ko 54 m³ a rana. Rafin da ake watsarwa 12.5 L/min ne, wato 0.75 m³/h. Masu sayar da membrane suna faɗin permeate a m³/rana, kuma ana sayen famfuna a m³/h.
Da'irorin sanyaya
Da'irar sanyaya ta 100 L/min, wato 6 m³/h, da hawan zafin jiki na 5 K tana ɗauke da 34.9 kW. Nauyi iri ɗaya a hawan 10 K yana buƙatar 50 L/min kawai, wato 3 m³/h. Rage kwarara zuwa rabi yana rage zuƙar ruwa da girman bututu zuwa rabi, amma ruwan da ke dawowa ya fi ɗumi.
Ƙayyade girman bututu ta gudu
A gudun ƙira na yau da kullum na 1.5 m/s, bututun DN25 yana ɗaukar 44 L/min, wato 2.65 m³/h, bututun DN50 177 L/min, wato 10.6 m³/h, kuma bututun DN100 707 L/min, wato 42.4 m³/h. Kwarara tana girma da murabba'in diamita, don haka ninka girman bututu sau biyu yana ninka ƙarfin ɗaukarsa sau huɗu a gudu ɗaya.
Fertigation a greenhouse
Yankin ban ruwa na greenhouse yana ɗaukar 30 L/min, wato 1.8 m³/h. Tsarin yankuna goma da ake ba wa ruwa bi da bi yana buƙatar famfo mai aƙalla 1.8 m³/h, amma famfo na 6 m³/h yana ba da damar yankuna uku a lokaci ɗaya. Ana ƙayyade girman na'urar allurar taki a matsayin kashi na babban kwarara, kamar yadda ake yi da kowane auna sinadari.
Yin giya da abinci
Jigilar wort na kamfanin giya ta 200 L/min, wato 12 m³/h, tana motsa batch na lita 2,000 cikin mintuna 10. Famfunan abinci suna da jeri na kwarara a m³/h, kuma ana zaɓar bututun tsafta ta yadda gudu zai tsaya ƙasa da 2 m/s. Layin sarrafawa na 12 m³/h yana buƙatar bututu na DN50.
Musayar zafi
Aikin heat exchanger shi ne kwarara an ninka da takamaiman zafi an ninka da canjin zafin jiki. Da 200 L/min, wato 12 m³/h, na ruwa da aka sanyaya da 10 K, aikin shi ne 140 kW. Aiki iri ɗaya a 50 L/min, wato 3 m³/h, yana buƙatar canji na 40 K. Masu ƙira suna zaɓar kwarara don daidaita kuɗin zuƙa da girman exchanger.
Da'irorin man hydraulic
Na'urar hydraulic ta injin kayan aiki tana ba da 40 L/min, wato 2.4 m³/h, a 160 bar. Ƙarfin hydraulic shi ne kwarara an ninka da matsi, 10.7 kW. Ƙasidun famfo suna faɗin displacement a cm³ ga kowace juyi, kuma kwarara tana biyo bayan gudu, don haka famfon 20 cm³ a 2,000 rpm yana ba da 40 L/min.
Ruwan boiler da condensate
Boiler da ke yin tan 1 na tururi a awa yana buƙatar 1 m³/h na ruwan abinci, wato 16.7 L/min. Ga masana'anta ta tan 10 a awa abincin shi ne 10 m³/h, wato 167 L/min. Dawowar condensate tana rage kwararar make-up, shi ya sa mitar make-up ke karanta ƙasa da famfon abinci sosai.
Gwajin kariya daga gobara
Ana gwada famfunan kashe gobara a kashi 100 cikin ɗari da kashi 150 cikin ɗari na kwararar da aka auna. Famfo na 2,400 L/min, wato 144 m³/h, ana gwada shi a 3,600 L/min, wato 216 m³/h, kuma dole ne har yanzu ya ba da kashi 65 cikin ɗari na head da aka auna. Rahoton gwaji a L/min da m³/h ya kamata ya nuna raka'o'in biyu gefe da gefe.
Misali mai aiki
Na'urar UV ta gwaji tana sarrafa 25 L/min, wato 1.5 m³/h. Cikakkiyar na'urar dole ta sarrafa 90 m³/h, don haka ma'aunin faɗaɗawa 60 ne kuma kwararar 1,500 L/min ce. Idan kashi na gwaji 40 mJ/cm² ne, babbar na'urar tana buƙatar kashi iri ɗaya, wato kusan ƙarin ƙarfin fitila sau 60.
Gajeriyar hanyar tunani
Don canza L/min zuwa m³/h a kai, ninka da 6 sannan ka matsar da ɗigo wurare biyu zuwa hagu. Ga 250 L/min: 250 × 6 = 1,500, wanda ya zama 15 m³/h. Hanyar daidai ce domin 0.06 kawai 6 ne a raba da 100.
Dabarun spreadsheet
A spreadsheet, ajiye L/min a ginshiƙi A kuma yi amfani da =A2*0.06 a ginshiƙi B. Akasin haka shi ne =B2/0.06. Ginshiƙi da ke ninka L/min da 60 yana ba da L/h, kuma wanda ke raba da 60 yana ba da L/s, don haka ma'aunai uku suna gefe da gefe.
Zagayewa a rahotannin masana'anta
Karatun mitar kwarara yana da rashin tabbas na kusan kashi 1 cikin ɗari, don haka faɗi m³/h zuwa muhimman lambobi uku. 140 L/min 8.4 m³/h ne, ba 8.40000 ba. Rahotannin da ke ambaton rafi ɗaya a raka'o'i biyu ya kamata su zagaya duka biyun ta hanya ɗaya.
Lanƙwasar famfo
Ƙasidar famfo tana nuna kwarara a m³/h a gefen kwance da head a mita a gefen tsaye. Famfo na 6 m³/h, wato 100 L/min, a head na 20 m yana da ƙarfin hydraulic na 327 W. A inganci na kashi 50 cikin ɗari sandar tana buƙatar 654 W. Lissafin “canza L/min zuwa m³/h” yana sanya famfon tebur a kan ma'aunin ƙasida.
Alamomin da za a haddace
1 L/min 0.06 m³/h ne. 5 L/min 0.3 m³/h ne. 25 L/min 1.5 m³/h ne. 100 L/min 6 m³/h ne. 250 L/min 15 m³/h ne. 1,000 L/min 60 m³/h ne. Da waɗannan alamomi kusan kowane canza L/min zuwa m³/h a kai yana yiwuwa.
Tsanin tunani
2 L/min: 0.12 m³/h. 12 L/min: 0.72 m³/h. 45 L/min: 2.7 m³/h. 130 L/min: 7.8 m³/h. 320 L/min: 19.2 m³/h. 800 L/min: 48 m³/h. 1,500 L/min: 90 m³/h. Tebur irin wannan yana ba ka damar gwada sakamakon na'urar lissafi da kallo ɗaya.
Dubawa ta juyawa
Don duba sakamakon lissafin “canza L/min zuwa m³/h”, raba amsar da 0.06, ko ninka da 16.67. Idan 45 L/min ya ba da 2.7 m³/h, to 2.7 × 16.67 = 45.0. Gwaji na biyu shi ne girma: lambar m³/h dole ne ta kai kusan kashi ɗaya cikin goma sha bakwai na ta L/min.
Alaƙa da lita a daƙiƙa da galan a minti
L/min ɗaya 1/60 L/s ne, 60 L/h, 0.06 m³/h da 0.2642 gal/min na US. Kwararar 180 L/min 3 L/s ce, 10.8 m³/h da 47.6 gal/min. Waɗannan suna bayyana kwararar ruwa ɗaya, kuma lissafin “canza L/min zuwa m³/h” yana musanya alamar kawai.
Hanyoyi biyu zuwa amsa ɗaya
Za ka iya ninka da 0.06 kai tsaye, ko ka bi ta lita a awa: L/min × 60 / 1,000. Hanya ta uku tana amfani da lita a daƙiƙa, L/min / 60 × 3.6. Idan hanyoyin ba su yarda ba, an kwafi lamba ɗaya ba daidai ba.
Da'irorin tsabtace-a-wuri
Masana'antun kiwo da giya suna tsabtace bututunsu ta hanyar sake zagaya ruwan wanki mai zafi a gudun aƙalla 1.5 m/s don kiyaye kwararar a hargitse. A layin DN50 wannan 10.6 m³/h ne, wato 177 L/min. Lissafin “canza L/min zuwa m³/h” a kan ƙimar famfon CIP yana nuna ko ƙaramin skid zai iya kaiwa wannan gudu a bututun da yake ba wa hidima.
Da'irorin ruwa mai tsabta ƙwarai
Da'irar ruwa mai tsabta ƙwarai ta dakin gwaji tana zagaya 2 L/min, wato 0.12 m³/h, don a ci gaba da motsa ruwan da kuma kiyaye juriya a sama. Masana'antar semiconductor tana zagaya 100 m³/h, wato 1,667 L/min. Ana kiyaye duka biyun sama da mafi ƙarancin gudu a bututu don hana ƙwayoyin cuta, don haka girman layin ne yake ƙayyade kwararar, ba buƙata ba.
Na'urorin tara zafin rana
Ana gudanar da filin na'urorin tara zafin rana yawanci a 1 zuwa 2 L/min ga kowace mita murabba'i ta na'urar. Filin 20 m² saboda haka yana buƙatar 20 zuwa 40 L/min, wato 1.2 zuwa 2.4 m³/h. Ƙaramar kwarara tana ɗaga zafin fita amma tana rage inganci, kuma ana zaɓar famfon zagayawa daga tebur a m³/h.
Gine-ginen gidaje da yin amfani a lokaci ɗaya
Shawa tana amfani da 9 L/min, wato 0.54 m³/h. A ginin gidaje 40 ƙira tana ɗauka cewa kusan ɗaya cikin biyar ne kawai ke ɗaukar ruwa a lokaci ɗaya, don haka mafi girman buƙata shawa takwas ne, wato 72 L/min, 4.3 m³/h. Ƙayyade girma ga duka 40 a lokaci ɗaya zai ba da 21.6 m³/h da bututu mai diamita fiye da ninki biyu na abin da ake buƙata.
Auna sinadari
Auna sinadari yawanci kashi ne tabbatacce na babban kwarara. Ga kashi 0.1 cikin ɗari a rafi na 3 m³/h, wato 50 L/min, famfon auna sinadari dole ne ya ba da 3 L/h, wato 50 mL/min. Famfon auna sinadari mai jeri na 0 zuwa 10 L/h saboda haka yana a kashi 30 cikin ɗari na bugunsa, wuri mai daɗi don daidaito.
Tacen yashi
Tacen yashi mai diamita 600 mm yana da faɗi na 0.283 m². A gudun tacewa na 30 m/h yana wucewa 8.5 m³/h, wato 141 L/min. Tace da aka ɗora a 50 m/h tana wucewa 14 m³/h, wato 236 L/min, amma tana tsaftace da ƙarancin kyau. Ƙimar kwararar mai sayarwa rufi ce, ba manufa ba.
Juyawar ruwan tafkin ninƙaya
Tafkin gida na 33.6 m³ da kwararar famfo ta 140 L/min, wato 8.4 m³/h, yana juya ruwan cikin awa 4. Dole tafkin jama'a ya juya ruwa cikin awa 2 zuwa 4, don haka tafkin 300 m³ yana buƙatar 75 zuwa 150 m³/h, wato 1,250 zuwa 2,500 L/min.
Na'urorin sassauta ruwa
Na'urar sassauta ruwa da aka ƙayyade ta kwararar aiki na 40 L/min, wato 2.4 m³/h, tana ba da hidima ga gida mai bandakuna biyu. Manyan na'urori suna ɗaukar 100 L/min, wato 6 m³/h. Idan kwarara ta wuce kwararar aiki da aka auna, taurin ruwa yana wucewa, don haka kololuwar ginin ya fi matsakaicin yau da kullum muhimmanci.
Najasa da fitar da ruwa
Ƙaramar tashar zuƙar najasa ta 20 L/s tana motsa 1,200 L/min, wato 72 m³/h. Famfon trash a wurin gini yana ba da 1,000 L/min, wato 60 m³/h. Fitar da ruwa daga rami na 300 m³ a wannan gudun yana ɗaukar awa biyar, amma shigar ruwan ƙasa na iya sa famfon ya ci gaba da aiki tsawon lokaci mai yawa.
Mitocin kwarara da turndown
Kowace mitar kwarara tana da jeri na amfani. Mita mai karatu daga 0.5 zuwa 15 m³/h tana rufe 8.3 zuwa 250 L/min, turndown na 30 zuwa 1. A ƙasa da mafi ƙanƙanta karatun ba abin dogaro ba ne, kuma sama da mafi girma mita ta lalace ko ta rasa daidaito. Canza jeri kafin kwatantawa da na'urar tebur a L/min.
Layukan magunguna da sinadarai masu laushi
Ginshiƙin chromatography yana aiki a 100 mL/min, wato 0.1 L/min, wanda 0.006 m³/h ne kawai. Ginshiƙin samarwa na girma sau 100 yana aiki a 10 L/min, wato 0.6 m³/h. Faɗaɗawar tana kiyaye gudun layi, don haka kwarara tana ƙaruwa tare da faɗin giciye, kuma ana amfani da lissafin “canza L/min zuwa m³/h” a kowane mataki.
Ƙarin ƙimomi don canza L/min zuwa m³/h
Jerin canje-canje mafi tsayi
Idan ƙimar da kake buƙata ba ta cikin jerin farko, waɗannan ƙarin canje-canje na iya kusantar isa a karanta kai tsaye:
- 0.1 L/min = 0.006 m³/h
- 0.5 L/min = 0.03 m³/h
- 3 L/min = 0.18 m³/h
- 4 L/min = 0.24 m³/h
- 7 L/min = 0.42 m³/h
- 15 L/min = 0.9 m³/h
- 20 L/min = 1.2 m³/h
- 75 L/min = 4.5 m³/h
- 200 L/min = 12 m³/h
- 500 L/min = 30 m³/h
- 2,000 L/min = 120 m³/h
- 10,000 L/min = 600 m³/h
Kura-kurai na yau da kullum da lissafin “canza L/min zuwa m³/h”
Ninka da 16.67
Tafiya daga L/min zuwa m³/h tana sa lambar ta ragu. Idan 100 L/min ya zama 1,667, to ka yi amfani da ma'aunin ɗayan hanyar ne.
Mintuna, awanni da daƙiƙu
L/h zuwa m³/h yana nufin rabawa da 1,000, L/min zuwa m³/h ninkawa da 0.06, kuma L/s zuwa m³/h ninkawa da 3.6. Duba raka'ar lokaci kafin amfani da ma'auni.
Kwarara da aka auna da ta gaske
Kwararar da aka auna ta famfo tana aiki a head ɗaya. A tsarin gaske kwararar tana inda lanƙwasar famfo ta haɗu da lanƙwasar tsarin, yawanci ƙasa da haka. Yi amfani da kwararar da aka auna lokacin da kake ƙayyade girman kayan da ke ƙasa.
Gajerun amsoshi
Yaya zan canza L/min zuwa m³/h?
Ninka lita a minti da 0.06.
m³/h nawa ne 100 L/min?
6 m³/h.
m³/h nawa ne 1,000 L/min?
60 m³/h.
L/min nawa ne 1 m³/h?
16.67 L/min.
Lambata tana barin na'urata?
A'a, lissafin yana gudana a cikin burauzarka.
Ƙarin shafuka da kammalawa
Don sauran canje-canjen kwararar ruwa duba Canza L/min zuwa gal/min, Canza km zuwa mi, Canza mi zuwa km, Canza °C zuwa °F, Canza °F zuwa °C, Canza hp zuwa W, Canza cm³ zuwa m³, Canza mph zuwa ft/s, Canza °C zuwa °Ré. Don akasin hanya duba Canza m³/h zuwa L/min.
A taƙaice, lissafin “canza L/min zuwa m³/h” yana nufin ninkawa ɗaya da 0.06 da raka'a da aka rubuta kusa da sakamakon. Ana lissafa lambarka a cikin na'urarka, ba tare da asusu ba kuma ba tare da loda ba.